The Reboot feature of the network device is useful when certain changes in the settings require a reboot lớn completely apply the configuration settings, or if the device is not functioning as expected. The configuration settings of the network device get reflected after the device restarts.
Bạn đang xem: Reset default cisco 2960
The Remix feature is used khổng lồ remove sầu the running or current configuration settings on the network device & restore it to the original mặc định settings. Manual rephối is recommended when the whole device needs lớn be reconfigured, or in case you forget the password & not able to recover by any means such as accessing the console using Telnet or Command Line Interface (CLI).
This article provides instructions on how khổng lồ manually reboot or remix your switch. If you would like khổng lồ use the CLI for the remix, cliông xã here khổng lồ access the CLI version.
Applicable Devices | Firmware Version
Manually Reboot the Switch
Important: When a switch is rebooted, the running configuration tệp tin is deleted. Before proceeding with the reboot instructions, make sure khổng lồ save all the running configuration settings khổng lồ avoid data loss. If you would like assistance with the reboot, check out the article Download or Back Up Configuration Files on a Switch.
Log in lớn the web-based utility of the switch & choose Administration > Reboot.
In the Reboot area, cliông chồng the radio button that corresponds to the desired time at which the switch reboots.
The options are:Immediate - Switch reboots immediately once Reboot is clicked.
(Optional) Check the Restore to Factory Defaults kiểm tra box to lớn reboot the switch lớn the factory mặc định configuration.
(Optional) Cheông chồng the Clear Startup Configuration File kiểm tra box khổng lồ clear the configuration on the switch after reboot.
Step 5Cliông xã Reboot khổng lồ reboot the switch.
Note: In this example, Immediate is chosen và Restore lớn Factory Defaults is checked.
Note: DHCPhường. Auto lớn Configuration is enabled by default in the factory settings. In order to lớn properly reboot the switch lớn factory defaults, you need to disable the DHCP.. Aukhổng lồ Configuration so the switch does not automatically download a configuration from a local VPS. To learn more about this feature, clichồng here for instructions.
You have now successfully rebooted your switch.
Manually Reset the Switch
Disconnect all Ethernet cables from the switch.
Using a pin, press & hold the Reset button on the switch for 15 to lớn 20 seconds.
Note: In this example, SG350X-24 24-Port Gigabit Stackable Managed Switch is used.
Xem thêm: Hướng Dẫn Làm Slide Thuyết Trình Powerpoint Đẹp Và Nhanh, Cách Làm Powerpoint
Once all the port LEDs light up, release the Reset button.
Connect your computer directly lớn the switch using an Ethernet cable.
Open a website browser on your computer và enter the IP address of the switch in the address bar. The mặc định IPhường address of the switch is 192.168.1.254.
Note: In order to lớn connect properly, make sure that your computer has an IPhường address in the same subnet as the switch. In this example, the IP address of the computer is 192.168.1.100 và the subnet mask is 255.255.255.0.
Once connected, the switch will prompt for a username & password. The mặc định username & password is: installmentsvfacr.com/cisteo.
Note: You will be required to configure new password for better protection of your network.
Enter installmentsvfacr.com in the Old Password field.
Enter the new password in the New Password & Confirm Password fields.
Chechồng the Disable Password Complexity Enforcement check box to lớn bypass the password strength requirements.
Note: To learn how to lớn configure the Password Strength security feature of the switch, clichồng here for instructions.
Cliông xã Apply lớn apply the configuration.
Once prompted by the popup message below, clichồng OK.
Xem thêm: Phần Mềm Bảo Vệ Điện Thoại Android Hiệu Quả Nhất, Top 5 Ứng Dụng Bảo Vệ Điện Thoại Android Tốt Nhất
(Optional) Clichồng Save to lớn save sầu settings to the startup configuration file.
Chuyên mục: Kiến Thức Bổ Ích